greentorch

Product VideoPress Play To Watch - High Speed Internet Connection Required

Product Characteristics

PRODUCT OVERVIEW: Overall, the EXIT Series Universal Thermoplastic LED Exit Sign is the most economical, affordable, and energy-efficient exit sign solution available today. Illumination is provided by ultra energy-efficient and super-bright red or green LEDs. The EXIT Series is ideal for retail, commercial, office and institutional applications. The slim profile of this sign blends in perfectly with current interior decors. The EXIT Series is UL 924 Listed for the U.S. and Canada. This truly universal exit sign comes standard with two face plates, a mounting canopy, and both 120 and 277v AC connections. The EXIT Series also comes with LED indicated push-to-test button. AC only and battery backup versions are available. Additional options include self-testing, infrared testing , dual-circuitry, and remote capability.

CONSTRUCTION: The EXIT series is constructed from durable corrosion and flame resistant thermoplastic. The EXIT series comes standard with a mounting canopy, two face plates, one back plate, removable chevrons and all mounting hardware. The EXIT series comes standard finished in white; optional black finish is available. A damp location rating is standard on all EXIT series products. An external LED status indicator and test switch is standard on all battery backup models.

ILLUMINATION: The EXIT series is configured with high-output LED lamps. LED version is standard with 120/277v AC input. Energy efficient LED technology uses 2 and 4 watts of electricity for green and red LEDs, respectively.

EXIT FACE:
Letter Size: 6” letters with 3/4” stroke
Directional Indicators: Infield applicable chevron arrows sized to meet UL visibility requirements.

BATTERY TECHNOLOGY: EXIT Series models with the battery backup option are designed with a maintenance free, sealed Nickel-Cadmium battery that provides a minimum 90 minutes of emergency operation. Recharge time of the battery is 24 hours. The maximum battery working temperature is 50 C or 122 F.

INSTALLATION: EXIT Series exit signs are suitable for surface ceiling, wall and end mounting. They are suitable for indoor and damp location installations on normally inflammable surfaces.

ELECTRICAL SPECIFICATIONS:
Utility Input: 120/277VAC, 60Hz

Temperature Range: Maximum battery working temperature is 50 C or 122 F

Recharge Duty Cycle: 24 hours

Controls: External test switch and monitor LED are standard on BB versions

Low Voltage Battery Disconnect: Sealed nickel-cadmium batteries provide a minimum 90 minutes of emergency operation; electronic cut-off circuit prevents over discharge.

CODE COMPLIANCE: UL924 Listed for the U.S. and Canada, CS860, NFPA, Life Safety 101, UL Listed for Damp Locations.

• 

Question : Does this exit sign plug-in to a wall outlet?
Answer : No. LED and other types of electrical exit signs have to be hard-wired into your electrical system. Electrical exit signs must be hard-wired to be building and fire code compliant. If you are looking for an exit sign to use in a location that does not have electricity available please look at our non-electrical Self Luminous and Photoluminescent exit signs.
Question : How do I configure the arrows for my sign?
Answer : Many signs come with the ability to set the arrows to your preference at the time of installation. This is called 'infield' applicable arrows. Almost all signs come with field applicable arrows. Here is how they differ. thermoplastic signs have pop-out arrows that can be removed or added to your choice. Cast-Aluminum signs have knock-outs. knock-outs are where we indent the back side of the face plate with a cut in the shape of arrows requiring the tap of a screw driver or hammer to 'knock' them all the way out. It is difficult to add back knocked-out arrows because the seams are exposed. It can be done, but it looks nicer when you are accurate. Self-luminous and photoluminescent signs use stencils and/or adhesive arrows. The adhesive arrows can only be applied once. You can remove them after application but the y are designed for permanent adhesion. The stencils can be popped out. Edge-lit exit signs can have the arrows pre-specified, adhesive, or static. Our signs use either static or pre-configured in general, as the panels for edge-lits are prone to smudges and fingerprints. Our signs look great because our chevrons are designed for easy and clean installation, minus the smudges.
Question : What is and do I need the battery backup option?
Answer : The battery backup option provides emergency battery power to illuminate your exit sign or emergency light in case of a fire, earthquake, or other emergency that causes a power outage. You must have the battery backup model if you DO NOT have a generator that provides emergency power to your facility.
Question : How do I know if this exit sign is approved for use in my city/county/state?
Answer : The UL listing (Underwriters Laboratories) for of our exit signs ensures that these signs are code compliant. UL tests our exit signs and then gives their approval. This approval comes in the form of a listing. As long as your exit sign is UL listed it will work for your jurisdiction. Two exceptions exist: New York City and Chicago, which have their own exit sign specifications in addition to the UL listing.
Question : What does 120/277v mean?
Answer : 120/277 refers to the line voltage that the exit sign can operate on. 120 refers to residential and small commercial line voltage while 220 refers to commercial and office building line voltage. The main point is that our exit signs will work in either situation so you don’t need to worry about the functionality. We recommend using a licensed electrician or maintenance professional to install exit signs, emergency lights and other safety egress equipment.

Our products typically carry a 5 year warranty though on certain items the warranty is longer. All products are guaranteed to be new, and free from defect. Batteries carry a 5 year prorated warranty. For specific warranty related questions, contact us and we will provide you with any needed information.

Name EXIT Thermoplastic Universal LED Indoor Exit Sign

Body Height 7.5

Body Width 12

Body Depth 1.5

Sign Face Count Single Sided,Double Sided

Listings UL924 US,UL924 Canada,CS860

Damp Location Rated Yes

Light Source LED

Body Material Thermoplastic

Canopy Material Thermoplastic

Back Up Power AC Only,AC Dual Circuit,Battery Backup

Country Of Origination China

Mounting Install Type Flush ,Universal Canopy,Top,Side

ArrowsChevrons Infield Applicable

Includes Battery Yes

Battery Terminal Type NA

Battery Model

Face Color White,Black

Frame Color NA

Letter Color Red,Green

Letter Height 6

Letter Stroke .75

Canopy Width 1

Canopy Height 6

Canopy Depth 1

Viewing Distance 100

Wet Location Rated No

Pendant Kit Capable Yes

AC Current Hz 60

Voltage 120,277

Remote Capable? No

Exit Sign Unit Wattage 2,4

Self Diagnostic Testing Yes

Compliance UL924,EnergyStar,NFPA101 Life Safety

IP65 Rated No

Emergency Light Capable? No

Class 1 Div 2 No

Frame's Sign Face Count 2

Emergency Light Bulb Type NA

Battery Amperes Hours .7

Battery Type Nickel Cadmium

Thumbnail Picture Link dimensionstnRDEL-d.jpg

Item Options Auto Test,Infrared Testing,Dual Circuit

Battery Volts 4.8

Max Operation Temperature 122

Max Operation Temperature Celsius 50

Regional Approvals Canada

Upload Graphic EXIT-R-W-tn.gif

Name EXIT Thermoplastic Universal LED Indoor Exit Sign

Thumbnail Picture Link EXIT-G-W-tn.gif

High Res

Thumbnail Picture Link EXIT-G-B-tn.gif

High Res

Thumbnail Picture Link EXIT-R-B-tn.gif

High Res

Thumbnail Picture Link dimensionstnEXIT-d.png

High Res