greentorch

Product Characteristics

PRODUCT OVERVIEW: The CRVE series of custom vandal resistant exits are designed to stand up to abuse in applications such as schools, public areas, institutions and apartment complexes where vandalism may potentially occur. The 14 gauge steel and polycarbonate faceplate offers extreme protection and superior performance. Tamper resistant screws insure the integrity of the unit. The CRVE series is available configured with high-output LED’s that evenly and brightly illuminate any custom image or wording.

CONSTRUCTION: The CRVE series is constructed from heavy duty steel. The face is constructed of 14 gauge steel backed with impact resistant polycarbonate. Tamper resistant screws are standard. The CRVE series comes standard with a white baked powder coat finish. Available in custom epoxy-based powder coat finishes. Single, double or universal face versions must be specified. The self-powered version comes standard with an external LED status indicator and test switch.

ILLUMINATION: The CRVE series is configured with high-output LED lamps. LED is standard with 120/277VAC input. All LED versions consume only 1.1W nominal power. Optional emergency illumination is provided by the LED light source at the following wattages:6VDC - 0.5 Watts; 2VDC - 1.5 Watts; 24VDC - 3.5 Watts.

EXIT FACE: Custom stencil design evenly illuminated by LED lights.

BATTERY TECHNOLOGY: The CRVE series is designed with a maintenance free, sealed nickel-cadmium battery providing a minimum emergency duration of 90 minutes. An optional 120 minute nickel-cadmium battery is available. Recharge time of the battery is 24 hours. The maximum battery operating temperature is 50° C.

INSTALLATION: The CRVE series exit is suitable for surface ceiling, wall and end mounting. Suitable for indoor installations.

ELECTRICAL SPECIFICATIONS:
Utility Input: 120/277VAC, 60 Hz.
Recharge Duty Cycle: 24 hours
Load Transfer: Solid state transfer circuit
Controls: Momentary test switch and LED AC-On indicator light Emergency Operation: Minimum 90 minutes
Safety Circuitry: Brown-out protection Overcharge protected Self-Test/Self-Diagnostics available

CODE COMPLIANCE: UL924 listed, state and local codes.

• 

Question : How do I configure the arrows for my sign?
Answer : Many signs come with the ability to set the arrows to your preference at the time of installation. This is called 'infield' applicable arrows. Almost all signs come with field applicable arrows. Here is how they differ. thermoplastic signs have pop-out arrows that can be removed or added to your choice. Cast-Aluminum signs have knock-outs. knock-outs are where we indent the back side of the face plate with a cut in the shape of arrows requiring the tap of a screw driver or hammer to 'knock' them all the way out. It is difficult to add back knocked-out arrows because the seams are exposed. It can be done, but it looks nicer when you are accurate. Self-luminous and photoluminescent signs use stencils and/or adhesive arrows. The adhesive arrows can only be applied once. You can remove them after application but the y are designed for permanent adhesion. The stencils can be popped out. Edge-lit exit signs can have the arrows pre-specified, adhesive, or static. Our signs use either static or pre-configured in general, as the panels for edge-lits are prone to smudges and fingerprints. Our signs look great because our chevrons are designed for easy and clean installation, minus the smudges.
Question : How do I know if this exit sign is approved for use in my city/county/state?
Answer : The UL listing (Underwriters Laboratories) for of our exit signs ensures that these signs are code compliant. UL tests our exit signs and then gives their approval. This approval comes in the form of a listing. As long as your exit sign is UL listed it will work for your jurisdiction. Two exceptions exist: New York City and Chicago, which have their own exit sign specifications in addition to the UL listing.
Question : What does 120/277v mean?
Answer : 120/277 refers to the line voltage that the exit sign can operate on. 120 refers to residential and small commercial line voltage while 220 refers to commercial and office building line voltage. The main point is that our exit signs will work in either situation so you don’t need to worry about the functionality. We recommend using a licensed electrician or maintenance professional to install exit signs, emergency lights and other safety egress equipment.
Question : What is and do I need the battery backup option?
Answer : The battery backup option provides emergency battery power to illuminate your exit sign or emergency light in case of a fire, earthquake, or other emergency that causes a power outage. You must have the battery backup model if you DO NOT have a generator that provides emergency power to your facility.
Question : I’ve seen similar looking exit signs for cheaper prices on other websites, why should I buy yours?
Answer : Simply put, we are the BEST. No one knows safety egress products like we do and no one stands behind and guarantees their products like we do. We offer more choices and higher quality products than our competitors. We have and continue to work with some of the largest and most exclusive companies in the world including McDonald’s, US Army, United Nations, and Giorgio Armani. If you are looking for the cheapest exit sign on the internet you are not going to find it here. If you are looking for a reliable, high-quality exit sign or emergency light from a company that can deliver on time and has the expertise to solve any type of obstacle or problem that could occur, you have come to the right place. The top quality appearance of our Greentorch website is matched by the effort and expertise of our knowledgeable and qualified team of sales technicians who are available through our toll free number (877-305-0898).

Our products typically carry a 5 year warranty though on certain items the warranty is longer. All products are guaranteed to be new, and free from defect. Batteries carry a 5 year prorated warranty. For specific warranty related questions, contact us and we will provide you with any needed information.

name CRVE Custom Vandal Resistant Exit

Body Height 12.25

Body Width 8.5

Body Depth 3

Sign Face Count Single Sided,Double Sided

Listings UL924 US,ETL

Damp Location Rated No

Light Source LED

Body Material Steel

Canopy Material Steel

Back Up Power AC Only,AC Dual Circuit,Battery Backup

Country Of Origination NA

Mounting Install Type Flush ,Top,Side

ArrowsChevrons NA

Includes Battery Yes

Battery Terminal Type NA

Battery Model

Face Color White

Frame Color White

Letter Color Red,Green

Letter Height 0

Letter Stroke

Canopy Width 0

Canopy Height 0

Canopy Depth 0

Viewing Distance 100

Wet Location Rated NA

Pendant Kit Capable Yes

AC Current Hz 50

AC Current Hz 60

Voltage 120,277,220

Remote Capable? No

Exit Sign Unit Wattage 1.1

Self Diagnostic Testing No

Compliance UL924,NFPA101 Life Safety,CSA,NEC

IP65 Rated No

Emergency Light Capable? No

Class 1 Div 2 No

Frame's Sign Face Count 2

Emergency Light Bulb Type NA

Battery Amperes Hours 0

Acrylic Panel Options NA

Battery Type Nickel Cadmium

Thumbnail Picture Link

Item Options Tamper-proof Screws,Special Wording

Unit Wattage

Emergency Head Wattage Options

Standard Lamp Count NA

Hazardous Rating Class NA

Hazardous Rating Division NA

Hazardous Rating Groups NA

Hazardous Rating Zones NA

Battery Volts 6

Max Operation Temperature 122

Min Operation Temperature 0

Max Operation Temperature Celsius 50

Min Operation Temperature Celsius 0

Regional Approvals Canada

Low Res

High Res

PDF

Installation Sheet

Upload Graphic

name CRVE Custom Vandal Resistant Exit

Thumbnail Picture Link dimensionstnCRVE-d.jpg

High Res