greentorch

Product Characteristics

PRODUCT OVERVIEW: The EL65 and EL65H provide superior emergency lighting illumination with the use of tungsten or halogen lamps, respectively. The EL65 series is constructed of impact resistant thermoplastic to withstand abuse and corrosion. With AC lock-out and brownout protection, the EL65 series is constructed as a dependable emergency lighting source for your indoor application.

CONSTRUCTION: Unit and lamp housings are precision molded with white or black finish, constructed of flame retardant, corrosion proof, UV stable thermoplastic. Units resist denting, peeling, scratching and corrosion.

ILLUMINATION: 6 volt, 5.4 watt wedge-based lamps or 6 volt, 5 watt MR-16 halogen lamps.


BATTERY TECHNOLOGY: Maintenance-free, sealed lead acid battery provides an estimated service life of 10 years with an operating temperature range of 65 F to 85 F or 19 C to 30 C.

INSTALLATION: Units are mountable in any orientation, on wall or ceilings. A universal mounting pattern and rear key hole slots are provided.

ELECTRICAL SPECIFICATIONS: Charger Type: Solid state type with constant current charge and transfer design
Utility Input: Universal voltage 80VAC to 300VAC including 120/277VAC, 60 Hz.
Temperature Range: 65 F to 85 F or 19 C to 30 C
Recharge Duty Cycle: 12 hours
Load Transfer: All models utilize a solid state transfer circuit for load connection.
Controls: Test switch and LED AC-On indicator light
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. DC Overload and Short Circuit Protection: Provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. Brownout Protection: Automatically switches the unit to emergency mode when utility voltage is reduced to the point at which most fluorescent light fixtures would extinguish.

CODE COMPLIANCE: UL924 listed, meets N.E.C., OSHA, and N.F.P.A. Life Safety Code 101.

• 
• 

Question : What is and do I need the battery backup option for my emergency light?
Answer : The battery backup option provides power to your emergency lights in case of a fire, earthquake, or other emergency that causes a power outage. You must have the battery backup model if you DO NOT have a generator that provides power to your facility in emergency circumstances.
Question : When do emergency lights come on?
Answer : Emergency lights turn on when power is lost to the facility. When equipped with a battery backup or supplied with electricity from a generator, Greentorch emergency lights will operate for a minimum of 90 minutes in emergency situations.
Question : Does this emergency light plug-in to a wall outlet?
Answer : No. Emergency lights have to be hard-wired into your electrical system to be building and fire code compliant. If you are looking for a 100% battery operated emergency light it does not exist because it is impossible to charge the battery for the light without a source of electricity. Batteries in emergency lights have a trickle charge, which means the battery uses a minute amount of electricity to stay charged incase of an emergency power outage.
Question : What does 120/277v mean?
Answer : 120/277 refers to the line voltage that the emergency light can operate on. 120 refers to residential and small commercial line voltage while 220 refers to commercial and office building line voltage. The main point is that our emergency lights will work in either situation so you don’t need to worry about the functionality. We recommend using a licensed electrician or maintenance professional to install the signs.
Question : Are there emergency lights with batteries that operate longer than 90 minutes in emergency power mode?
Answer : Yes, there are. The higher the wattage of the emergency lighting unit the longer the unit will operate in emergency power mode (while keeping the lamp head wattage constant). Please see our industrial line of emergency lights, which come with large batteries (up to 400 watts).
Question : What is remote head capability?
Answer : Remote head capability means that the emergency lighting unit has been equipped with a battery that is powerful enough to supply power remotely to individual lamp heads. The larger the battery, the more remote heads a unit can handle.

Our products typically carry a 5 year warranty though on certain items the warranty is longer. All products are guaranteed to be new, and free from defect. Batteries carry a 5 year prorated warranty. For specific warranty related questions, contact us and we will provide you with any needed information.

Name EL65 & EL65H Industrial Emergency Light

Body Height 5.5

Body Width 12.125

Body Depth 4

Body Depth 4.5

Listings UL924 US

Damp Location Rated Yes

Light Source Halogen

Light Source Tungsten

Body Material Thermoplastic

Back Up Power AC Only,Battery Backup

Country Of Origination NA

Mounting Install Type Universal Canopy

Includes Battery Yes

Battery Terminal Type F1

Wet Location Rated No

Pendant Kit Capable No

AC Current Hz 60

Voltage 120,277

Remote Capable? No

Compliance UL924,EnergyStar,NFPA101 Life Safety,OSHA,NEC,NAILD

IP65 Rated No

Battery Amperes Hours 0

Battery Type Sealed Lead Calcium

Item Options Auto Test

Unit Wattage 10,12

Emergency Head Wattage Options 5.4,6

Standard Lamp Count 2

Battery Volts 6

Max Operation Temperature 85

Min Operation Temperature 65

Max Operation Temperature Celsius 30

Min Operation Temperature Celsius 19

Name EL65 & EL65H Industrial Emergency Light

Thumbnail Picture Link dimensionstnEL65-d.jpg

High Res

Thumbnail Picture Link dimensionstnEL65H-d.jpg

High Res