greentorch

Need help? 888 394 8786

Hazardous Location Fiberglass and Polyester Emergency Light Product Series Code: HZFPEL


MSRP: $890.00
Your Starting Price: $676.00
Savings: $214.00 (24.04%)

Shipping Weight:0.00 .lbs

Quantity in Basket: None

Volume Price

10-30 31-50 51+
$655.72 $635.44 $608.40
Discounts Applied at Checkout


As Configured:

check out
  • Send this item to a friend

Product Characteristics


PRODUCT OVERVIEW: The HZFPEL is a hazardous location emergency light that comes in 6 and 12 volt versions constructed from rugged fiberglass and polyester. These emergency lights are sealed and gasketed and suitable for use in NEMA 3, 4X and 12 areas.

CONSTRUCTION: Impact resistant, industrial gray fiberglass reinforced polyester enclosure with stainless steel hardware is completely sealed and gasketed. The enclosure includes a built in window in the front cover for viewing the AC indicator light and any optional metering devices. Impact resistant, UV stable, flame rated thermoplastic are used for lamp housing and are matched with swivel assemblies in gray finish to match unit housing. Heads and swivels are sealed and gasketed. Lighting heads are fully adjustable and feature lockable swivels.

ILLUMINATION: High output sealed beam lamps provide glare-free light distribution. Lamp Type: Par 36 sealed beam type 6 Volt Lamp Ratings: 8 to 30 watt tungsten, 8 or 12 watt halogen 12 Volt Lamp Ratings: 12 to 30 watt tungsten, 8 or 12 watt halogen Lamp Life: 100 hours (expected average)


BATTERY TECHNOLOGY: Sealed lead calcium or longest life sealed nickel cadmium maintenance free battery (depending on model) designed to provide many years of dependable service.

INSTALLATION: Units are designed for installation to wall surfaces by means of internal knockouts or four external mounting feet provided with the enclosure. A wiring hub is provided on the right hand side of the enclosure for attachment of surface wiring conduit.

ELECTRICAL SPECIFICATIONS: Charger Type: Fully automatic and temperature compensating Nickel Cadmium Models: Constant Current Type Lead Calcium Models: Variable Rate Float Type
Utility Input: 120/277VAC, 60 Hz. Power Consumption: 68 watts (maximum) Temperature Range (Lead Calcium Models): 68ºF to 86ºF (20ºC to 30ºC) Temperature Range (Nickel Cadmium Models): 20ºF to 95ºF (-7ºC to 35ºC)
Recharge Duty Cycle: 24 hours
Load Transfer: All models utilize a solid state transfer circuit for load connection.
Controls: Momentary test switch and LED AC-On indicator
Safety Circuitry: AC Lockout: Prevents battery discharge prior to initial unit power-up saving installation time.
Low Voltage Battery Disconnect: Protects the battery from being severely damaged by deep discharge during prolonged power failures. Short Circuit Protection: On units with solid state transfer, output protection is provided by a disconnect circuit that automatically resets itself when the fault condition is corrected. Brownout Protection: Automatically switches the unit to emergency mode when AC sags below 80% of nominal.

CODE COMPLIANCE: All models are UL924 Listed and meet NFPA 101 Life Safety Code, NEC, OSHA, BOCA, NSF Standard 2 “Splash Zone,” state and local codes.


Our products typically carry a 5 year warranty though on certain items the warranty is longer. All products are guaranteed to be new, and free from defect. Batteries carry a 5 year prorated warranty. For specific warranty related questions, contact us and we will provide you with any needed information.

name HZFPEL Hazardous Location Fiberglass and Polyester Emergency Light

Body Height 19.4

Body Height 21.4

Body Width 11.2

Body Width 11.7

Body Depth 6.6

Body Depth 7.1

Listings UL924 US

Damp Location Rated Yes

Light Source Halogen

Light Source Tungsten

Body Material Fiberglass,Polyester

Back Up Power AC Only,Battery Backup

Country Of Origination NA

Mounting Install Type Flush

Includes Battery Yes

Battery Terminal Type NA

Wet Location Rated Yes

Pendant Kit Capable No

AC Current Hz 60

Voltage 120,277

Remote Capable? No

Compliance UL924,NFPA101 Life Safety,OSHA,BOCA,NEC

IP65 Rated No

Battery Amperes Hours 0

Battery Type Nickel Cadmium,Sealed Lead Calcium

Item Options Voltmeter,Ammeter,Auto Test,Internal Heater,Shatter-proof Heads

Unit Wattage 25,27,100,125,150,50,75,180,120

Emergency Head Wattage Options 8,12,18,25,30,6

Standard Lamp Count 1,2,3,0

Hazardous Rating Class NA

Hazardous Rating Division NA

Hazardous Rating Groups NA

Hazardous Rating Zones NA

Battery Volts 6,12

Max Operation Temperature 86

Min Operation Temperature 68

Max Operation Temperature Celsius 30

Min Operation Temperature Celsius 20

Regional Approvals NA

Low Res

High Res

PDF

Installation Sheet

Upload Graphic

name HZFPEL Hazardous Location Fiberglass and Polyester Emergency Light

Thumbnail Picture Link dimensionstnHZFPEL-d.png

High Res

Thumbnail Picture Link dimensionstnHZFPEL-d2.png

High Res