greentorch

Product Characteristics

PRODUCT OVERVIEW: City of New York approved LED exit signs are efficient and easy to install. Available in battery backup and AC-only models. Units are also available with emergency lighting heads for combination exit/emergency lighting capability. Heavy duty 20 gauge steel construction for durability you can depend on.

CONSTRUCTION: 20 gauge steel construction standard in powder coated white. Emergency light model available with up to three emergency heads.

ILLUMINATION: Illuminated with energy efficient LEDs that last an estimated 25 years.

EXIT FACE:
Letter Size: 6” letters with 3/4” stroke
Directional Indicators: Infield applicable chevron arrows sized to meet UL visibility requirements.

BATTERY TECHNOLOGY: Offered in your choice of AC only and battery backup.


ELECTRICAL SPECIFICATIONS:
Utility Input: 120/277VAC, 60 Hz.
Recharge Duty Cycle: 24 hours
Load Transfer: Solid state transfer circuit Emergency Operation: Minimum 90 minutes

CODE COMPLIANCE: All models are UL listed and New York City approved.

• 

Question : How do I configure the arrows for my sign?
Answer : Many signs come with the ability to set the arrows to your preference at the time of installation. This is called 'infield' applicable arrows. Almost all signs come with field applicable arrows. Here is how they differ. thermoplastic signs have pop-out arrows that can be removed or added to your choice. Cast-Aluminum signs have knock-outs. knock-outs are where we indent the back side of the face plate with a cut in the shape of arrows requiring the tap of a screw driver or hammer to 'knock' them all the way out. It is difficult to add back knocked-out arrows because the seams are exposed. It can be done, but it looks nicer when you are accurate. Self-luminous and photoluminescent signs use stencils and/or adhesive arrows. The adhesive arrows can only be applied once. You can remove them after application but the y are designed for permanent adhesion. The stencils can be popped out. Edge-lit exit signs can have the arrows pre-specified, adhesive, or static. Our signs use either static or pre-configured in general, as the panels for edge-lits are prone to smudges and fingerprints. Our signs look great because our chevrons are designed for easy and clean installation, minus the smudges.
Question : How do I know if this exit sign is approved for use in my city/county/state?
Answer : The UL listing (Underwriters Laboratories) for of our exit signs ensures that these signs are code compliant. UL tests our exit signs and then gives their approval. This approval comes in the form of a listing. As long as your exit sign is UL listed it will work for your jurisdiction. Two exceptions exist: New York City and Chicago, which have their own exit sign specifications in addition to the UL listing.
Question : What does 120/277v mean?
Answer : 120/277 refers to the line voltage that the exit sign can operate on. 120 refers to residential and small commercial line voltage while 220 refers to commercial and office building line voltage. The main point is that our exit signs will work in either situation so you don’t need to worry about the functionality. We recommend using a licensed electrician or maintenance professional to install exit signs, emergency lights and other safety egress equipment.
Question : What is and do I need the battery backup option?
Answer : The battery backup option provides emergency battery power to illuminate your exit sign or emergency light in case of a fire, earthquake, or other emergency that causes a power outage. You must have the battery backup model if you DO NOT have a generator that provides emergency power to your facility.

Our products typically carry a 5 year warranty though on certain items the warranty is longer. All products are guaranteed to be new, and free from defect. Batteries carry a 5 year prorated warranty. For specific warranty related questions, contact us and we will provide you with any needed information.

Name NYXC New York Approved Exit Sign Combination

Body Height 15.5

Body Width 14.5

Body Depth 4

Sign Face Count Single Sided,Double Sided

Listings UL924 US

Damp Location Rated No

Light Source LED

Body Material Steel

Canopy Material Steel

Back Up Power Battery Backup

Country Of Origination NA

Mounting Install Type

ArrowsChevrons Infield Applicable

Includes Battery Yes

Battery Terminal Type NA

Battery Model

Face Color White,Black

Frame Color NA

Letter Color Red

Letter Height 8

Letter Stroke 1

Canopy Width 0

Canopy Height 0

Canopy Depth 0

Viewing Distance 100

Wet Location Rated No

Pendant Kit Capable NA

AC Current Hz 0

Voltage NA

Remote Capable? Yes

Exit Sign Unit Wattage

Self Diagnostic Testing No

Compliance UL924

IP65 Rated No

Emergency Light Capable? Yes

Class 1 Div 2 No

Frame's Sign Face Count 1

Emergency Light Bulb Type Halogen

Battery Amperes Hours 0

Acrylic Panel Options NA

Battery Type Sealed Lead Acid

Thumbnail Picture Link

Item Options

Unit Wattage 36,24

Emergency Head Wattage Options 12

Standard Lamp Count 2,3,0

Hazardous Rating Class NA

Hazardous Rating Division NA

Hazardous Rating Groups NA

Hazardous Rating Zones NA

Battery Volts

Max Operation Temperature 0

Min Operation Temperature 0

Max Operation Temperature Celsius 0

Min Operation Temperature Celsius 0

Regional Approvals New York

Low Res

High Res

PDF

Installation Sheet

Upload Graphic

Name NYXC New York Approved Exit Sign Combination

Thumbnail Picture Link dimensionstnNYXC-d.png

High Res